The Ford 351 Windsor and Cleveland are two different types of V8 engines. Both engines have a lot in common, but they also have some differences that you should know about.
The 351 Windsor is a 90-degree V8 engine that was first produced in 1969. It has a bore and stroke of 4.00 inches by 3.50 inches, and it has a displacement of about 351 cubic inches. It has an aluminum cylinder head and a cast iron block, and it was designed to be a high-performance engine with a lot of torque.
The 351 Cleveland is also a 90-degree V8 engine, but it was first produced in 1970. It has a bore and stroke of 4.00 inches by 3.50 inches, and it has a displacement of about 351 cubic inches. It has an aluminum cylinder head and a cast iron block, and it was designed to be a high-performance engine with a lot of power.
The two engines look similar, but they have some differences. The 351 Windsor has a two-barrel intake manifold, while the 351 Cleveland has a four-barrel intake manifold. The 351 Windsor has an octane rating of 87, while the 351 Cleveland has an octane rating of 92. The 351 Windsor has an output of about 200 horsepower, while the 351 Cleveland has an output of about 330 horsepower.
The two engines also have different prices. The 351 Windsor is usually cheaper than the 351 Cleveland, because it is an older engine and parts are more readily available. However, the 351 Cleveland is more powerful and has higher performance, so it usually costs more.
When it comes to deciding between the 351 Windsor and Cleveland, it comes down to what you need the engine to do. If you need a reliable engine with good torque and power, then the 351 Windsor is the engine for you. If you need an engine that can provide more power and performance, then the 351 Cleveland is the engine for you.
Exploring The Difference Between The 351 Windsor And Cleveland Engines
The Ford 351 Windsor and Cleveland engines are two of the most popular V8 engines from the Ford Motor Company. Both engines were designed for the Ford Mustang, but the Windsor was also used in other models like the Ford Torino. Both engines have similar displacement and power output, but there are some key differences between them. So, what exactly is the difference between the 351 Windsor and Cleveland engines?
The most noticeable difference between the 351 Windsor and Cleveland engines is the location of the spark plug. The Windsor engine has spark plugs on the outside of the cylinder head, while the Cleveland engine has the spark plugs on the inside of the cylinder head. This difference in spark plug placement affects the way the engine performs, with the Cleveland engine typically being more powerful and responsive. Additionally, the 351 Windsor has a shorter stroke length than the Cleveland engine.
Another difference between the 351 Windsor and Cleveland engines is the valve arrangement. The Windsor engine has a single overhead valve (SOHC) arrangement, while the Cleveland engine has a double overhead valve (DOHC) arrangement. This difference in valve arrangement affects the overall performance of the engine, with the Cleveland engine typically providing more power and torque than the Windsor engine.
The two engines also differ in terms of cost. The 351 Windsor is one of the most affordable V8 engines from Ford, with new engines typically costing around $2,000. The Cleveland engine, on the other hand, is typically more expensive, with prices ranging from $3,000 to $5,000. Additionally, the 351 Windsor is typically easier to find than the Cleveland engine, as it was used in more models than the Cleveland.
In terms of performance, both the 351 Windsor and Cleveland engines can provide good power and torque output. However, the Cleveland engine typically provides more power and torque than the Windsor engine, making it the preferred choice for performance applications. Additionally, the 351 Windsor is typically better suited for daily driving purposes, due to its lower cost and easier availability.
351 Windsor vs. Cleveland Engine Comparison Table
| Engine Type | Spark Plug Location | Valve Arrangement | Cost |
|---|---|---|---|
| 351 Windsor | Outside of Cylinder Head | SOHC | $2,000 |
| Cleveland | Inside of Cylinder Head | DOHC | $3,000 – $5,000 |
Overall, the 351 Windsor and Cleveland engines are similar in many ways, but they do have some major differences. The 351 Windsor is typically the more affordable and easier to find engine, making it the preferred choice for daily driving and light performance applications. The Cleveland engine, on the other hand, typically provides more power and torque, making it the preferred choice for performance applications.
Comparing The Design And Performance Of The 351 Windsor And Cleveland Motors
The 351 Windsor and Cleveland motors are two of the most popular Ford V8 engines, both of which have been used in a variety of vehicles over the years. Both engines offer deliver plenty of power and torque while still being relatively small in size. They are both considered to be reliable and durable engines, making them popular choice for hot rods and other performance applications. So, what is the difference between the 351 Windsor and Cleveland motors?
The most obvious difference between the 351 Windsor and Cleveland motors is the design. The 351 Windsor has a single overhead cam and two valves per cylinder, while the 351 Cleveland has two overhead cams and four valves per cylinder. Both engines have the same bore and stroke and both use the same basic block design. The 351 Windsor typically produces more torque than the Cleveland, giving it a noticeable boost in power and performance.
When it comes to performance, the 351 Windsor and Cleveland motors are both capable of producing plenty of horsepower and torque for their size. The 351 Windsor is known for its strong low-end torque, while the Cleveland is more suited for higher RPMs and higher horsepower applications. The Cleveland can produce more horsepower than the Windsor, but it also requires more maintenance and is more expensive.
The table below shows a comparison of the design and performance of the 351 Windsor and Cleveland motors.
| Feature | 351 Windsor | 351 Cleveland |
|---|---|---|
| Design | 1 overhead cam, 2 valves per cylinder | 2 overhead cams, 4 valves per cylinder |
| Horsepower | 200-400 hp | 250-450 hp |
| Torque | 300-450 lb-ft | 250-400 lb-ft |
| Cost | Less expensive | More expensive |
In conclusion, the 351 Windsor and Cleveland motors both offer plenty of performance and durability, but the designs and performance capabilities are quite different. The 351 Windsor is more suitable for applications where low-end torque is important and is less expensive, while the Cleveland is better suited for high RPMs and higher horsepower applications and is more expensive.
The 351 Windsor is a V8 engine with a displacement of 351 cubic inches, whereas the 351 Cleveland is a V8 engine with a displacement of only 335 cubic inches.
No, the 351 Windsor is produced by Ford Motor Company, whereas the 351 Cleveland is produced by the Cleveland division of Ford.
The 351 Windsor engine is typically used in cars, trucks, and SUVs from the Ford Motor Company.
No, the 351 Cleveland engine was produced from 1970-1974 and is considered an older engine design.
Yes, the 351 Windsor engine is more powerful than the Cleveland engine due to its larger displacement size.
The 351 Cleveland engine typically uses regular gasoline.
The 351 Windsor engine typically uses unleaded gasoline.
No, the 351 Windsor and Cleveland engines are not designed to be used together in the same vehicle.
Generally speaking, no, the parts between the two engines are not interchangeable.
Generally speaking, the 351 Windsor engine is more expensive to maintain than the Cleveland engine.
